TVLogic LUM-310X 31inch 4K HDR 4096 x 2160 Reference Monitor
Contact us for pricing
Current Stock:
TVLogic LUM-310X 31inch 4K HDR 4096 x 2160 Reference Monitor with Dual Cell layer Technology LCD. The LUM-310X is a 4K HDR Reference Master production monitor with a 31-inch Dual Cell LCD designed to reproduce reference HDR content at a maximum luminance of 1,000 nits with a simultaneous deep black minimum of 0.001 nits. This makes possible a simultaneous contrast ratio nearing 1 million to 1. The LUM-310X supports various HDR standards and multiple colour gamut’s including Rec.709, DCI, and Rec.2020. Blue Only/ Mono H/V Delay Marker Various Scan Modes Waveform/ Vector Scope 1:1 Pixel Mapping Modes for SD/HD
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Grey and Blue are of the same brightness.
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the centre of the screen.
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
Waveform Y: Displays the Luma (Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’ of the input signals onto the X-Y axis.
Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
Display Spec.
Size
31.1"
Resolution
4096 X 2160 (17 : 9)
Pixel Pitch
0.1704mm
Color Depth
1.07B
Viewing Angle
178°(H) / 178°(V)
Luminance
1,000cd/m2
Contrast Ratio
1,000,000:1
Display Area
698(H) x 368(V) mm
Input
4 X BNC
12G-SDI A/B Channel Input, 3G-SDI C/D Channel Input
1 X HDMI
HDMI Input
Output
4 X BNC
12G-SDI A/B,3G-SDI C/D Channel (Active Through Out)
Audio
Audio In
Embedded Audio/Analog Stereo (Phone Jack)
Audio Out
Analog Stereo (Phone Jack), Internal Speaker(Mono)
FPGA Functions
Blue Only, H/V Delay, Marker, Mono, User Aspect, Various Scan Modes, Waveform/Vector, SingleMode
Closed Caption
Calibration
TVLogic Colour Calibration Utility, 3D LUT & Adjustable Gamma, 3rd Party 3D LUT Import
Other Functions
REMOTE
TVLogic’s specification
USB
Firmware update by USB cable
Firmware update by USB memory stick
Ethernet
-
Conversion
SDI-to-SDI