MultiDyne SilverBack V 4K Camera Back Transceiver
£9,502.90 (ex VAT)
£11,403.48 (inc VAT)
SKU: SB5-C4K1-SPRJ-5CVV-S
Current Stock:
The SilverBack V provides a robust, full bandwidth fiber optic link between any 12G, Quad-Link or Dual-Link 4Kcamera and your truck, control room or “video village”position. The system puts all of the signals needed for multi-camera 4K/UHDTV production onto a single tactical or SMPTE hybrid fiber cable. Ensuring robust, trouble-free connectivity on any studio or remote production. The system can transport up to one 12G-SDI, two 6G-SDI, or four 3G-SDI signal paths from the camerato the Base Station and one return path the otherway. Full camera control is provided by the cameramanufacturer’s control panel via serial or a 10/100/GigE ethernet path. Genlock, intercom, tally, and audio paths are also provided. Operate on hybrid cable and provide power to camera or use lightweight, robust tactical fiber and power the camera locally. The compact SilverBack V Camera Unit mounts elegantly to any 12G, Dual-Link or Quad-Link 4K camera seamlessly, with no angles or sharp corners. The LCD display shows status and controls and is easy for the operator to see, but not intrusive. When equipped with the integrated “Juice” option, you won't need any external power supplies; use the rear battery plate for back-up power. The SilverBack V Base Station is a standard 2RU enclosure. With LED status indicators for each signal, and a color LCD screen that intuitively displays system status and general health. The base station is available in single and dual channel configurations. The unit also provides support for two standard width (2 slot) open Gear rear modules that can handle up to four cards. The system design is modular, so a system can be builtwith various types, amounts, and directions of I/O. A representative signal flow is shown. The SilverBack V incorporates the proven connectivity solutions of MultiDyne’s decades of experience outfitting production environments for OB vans and production control rooms. All this to create a finely tuned solution for 4K/UHDTV multi-camera production. Designed and built in New York. • All signals on ONE Cable Interface Data Rate - 270Mbps, 1.5Gbps, 3Gbps, 6Gbps, 12Gbps Number of Channels (cam to base) - 1 to 8, depending on particular model ordered Number of Channels (base to cam) - 1 to 8, depending on particular model ordered Input/output Level - 800mVp-p Input/output Impedance - 75 Ohms Connector, Camera Unit – HDBNC Connector, Base Unit - HDBNC Supported – Yes Type – Analog Black Burst, HD Tri-Level Impedance – 75 Ohms Level – 1Vp-p Connector, Camera Unit – HDBNC Connector, Base Unit – HDBNC Type - Balanced Analog, AES3 Number of Channels (bidirectional) - 4 Analog, 2 AES, 2 MIC/Line (cam to base only) Level (Analog) - +4dBu nominal, +24dBu max. Mic Input Adjustment Range - 0 to 60dB Input Impedance - > 10k ohms Output Impedance - 50 ohms THD+N - Better than 0.1% Frequency Response - +0.1 dB/-3dB, 20Hz to 20kHz MIC Phantom Power - 48V AES Sampling - 24 bit, 48kHz Connector, Camera Unit - MDR-26, miniXLR (MIC/Line Inputs) Connector, Base Unit - DB25 (Tascam compatible) Number of Channels - 2 Interface - 2-Wire or 4-Wire Compatibility - RTS, Clear-Com Headset MIC Type - Dynamic Headset MIC Impedance - 200 Ohms nominal Level, 4-Wire - +4dBu nominal, +24dBu max. Level, 2-Wire - -10dBu nominal Connector, Headset - miniXLR-5 Connector, Base Unit - DB25 (Sony/Panasonic CCU compatible) Type - RS232, RS422, LANC Number of Channels (bidirectional) - 2 Data Rate - 1Mbps max Connector, Camera Unit - HD15 Connector, Base Unit - DB9 (2) Data Rates - 10/100/1000 Base-T Connector - RJ45 Cat5e Number of Channels (base to cam) – 3 Number of Channels (cam to base) – 1 Input Type - Short to GND or TTL Low to Activate Output Type - Relay Contact Closure (30V, 2A max) Connector, Camera Unit - HD15 Connector, Base Unit - DB25 (shared with intercom) Type - SMPTE/EBU LTC Input - Unbalanced, 15Vp-p max Output - Unbalanced, 3Vp-p max Connector, Camera Unit – HDBNC Connector, Base Unit - HDBNC Operating Wavelengths - 1271-1611nm TX Laser Output Power - 0dBm (Class 1 Laser) Receiver Sensitivity - -24dBm (1.25G), -20dBm(3G), -14dBm(12G) Optical Budget* - 16dB (3G models), 10dB (12G/Gearbox models) Fiber Compatibility - Single-mode Available Optical Connector Types - opticalCON DUO, SMPTE 304M, ST, LC * The number, quality, and cleanliness of all fiber cables and interconnection points in the fiber path will affect the maximum usable cable length. Power Input, Base Unit - IEC320, Universal Input, 90-250VAC, 50-60Hz Power Consumption, Base Unit - 450W max Power Input, Camera: Remote Power - Hybrid Fiber Connector, 54 VDC Local Power - Battery Mount (Anton Bauer or V-Mount), 11-17 VDC Power Consumption, Camera Unit - 30W max Total Power Available from Camera Unit via Hybrid Fiber for Cameraand Accessories* - 14V (nominal), 150W max Auxiliary Power Outputs from Camera Unit – 2 Connector Type - D-Tap Power Output - 14V (nominal), 5A max (each) *Maximum powered Hybrid Fiber distance varies and is determined by the size of the hybrid cable and the overall system power requirements. Power consumption of the camera, viewfinder, lens, and any other accessories will affect maximum available power at any given distance. Dimensions Camera Unit - 6” x 7” x 4” Base Unit - 19” x 22” x 3.5” (2RU) Operating Temperature - 0 to 50°C Operating Temperature - 0 to 95% RH, non-condensing. Laser Safety - Class 1 Laser Other - RoHS
Availability: Available in normally 1-2 weeks
Multipurpose Your 12G, 4K Camera
Integrated Camera Unit
Next Generation Base Station
MultiDyne Innovation
• Up to 1x 12G, 2x 6G, or 4x 3GProgram & Bi-Directional 3G-SDIw20+Km Operation
• Universal intercom interface with IFB/PGM injectw2 Mic inputs with phantom and pre-amps
• Anton-Bauer or “V-mount” battery option
• Integrated Tally Indicator
• Camera RCP Controlw1 additional data path (232/422)
• Optical connector on Integrated swivel
• Top & bottom dovetail plates with 1/4-20 & 3/8-16 taps for mounting accessories
• Tally/GPIO cable
• Optional Tally light accessory
• Rugged lightweight, low-profile design
• Designed & built in New York
SilverBack V Camera Mountable Fiber Optic Transmission System for 12G / 2x6G / 4x3G UHD Camcorders
SDI Video
- SMPTE ST259, ST292, ST425, ST2081, ST2082Video, Genlock
Audio
Intercom
Serial Data (Control)
Ethernet
Tally/GPIO
Timecode
Electro-Optical
Power
Mechanical/Environmental
Compliance
You Might Be Interested In
MultiDyne
MultiDyne SilverBack-II Camera Back Fiber Transceiver: Two-way 3G HD-SDI Camera Video
£4,124.88 (ex VAT)
Advice From Our Trusted Team
Reliable Servicing and Repairs
Contract Hire Options Available