Sony DWT-P01N/33 Wireless Transmitter
SonyAbout the Sony DWT-P01N Wireless Transmitter
The Sony DWT-P01N XLR plug-on transmitter forms part of the DWX N series digital wireless microphone system that offers high-quality full-digital operation shorter audio latency and more reliable RF transmission mode - a perfect match for high-quality ENG/EFP applications.
The DWX N series system delivers superb-quality wireless transmission of 24-bit digital audio. Thanks to its improved codec and new hardware, it can provide higher sound quality with lower audio latency.
NOTE: This model is available in multiple versions to support the widest possible range of operating frequencies. Please refer to product specifications for more information.
Low noise head amplifier
Low noise head amplifier achieves -128dBu noise floor.
Flexible audio input control
48dB at 3dB steps audio attenuation supported. Line / Microphone input supported. Transmitter audio attenuation can be controlled from receiver side using Sony wireless remote control system.
Flexible battery options
The DWT-P01N is able to accept a variety of AA type battery, such as Alkaline, Lithium, NiMH etc.
Selectable output power
Various output powers are selectable to provide the user with options for stable multi-channel or long distance operation. (1/10/50 mW)
Versatile display using organic LED display
A variety of information is obtained at a glance from the new OLED display panel, such as the reception channel, Audio and RF signal status, user name, user group, Lock etc.
Wireless remote control
A duplex wireless remote control system is supported. The DWT-B01N is able to be controlled via the DWR-S02DN receiver. Settings that are changed on the receiver are automatically sent and changed on the paired DWT-P01N transmitter.
Wide operating frequency ranges
DWT-P01N can operate over a 72Mhz frequency band.
Transmitting section | |
Oscillator | Crystal controlled PLL synthesizer |
Carrier Frequencies: Americas | UC14: UHF-TV channels 14-25 (470 - 542 MHz) |
(depending on model) | UC30: UHF-TV channels 30-36 (566-608 MHz) and 38-41 (614-638 MHz) |
UC42: UHF-TV channels 42-51 (638-698 MHz) | |
Carrier Frequencies: Europe, Middle | CE33: UHF-TV channels 33-40 566 MHz to 630 MHz (Not available in New Zealand) |
East, Africa, Australia, New Zealand | CE42: UHF-TV channels 42-50 638 MHz to 710 MHz |
(depending on model) | CE51: UHF-TV channels 51-59 710 MHz to 782 MHz (Not available in Australia or New Zealand) |
Channel step | 25 kHz |
RF power output | 1 mW/10 mW/50 mW (e.r.p.) selectable |
Occupied RF bandwidth | 192 kHz or less |
Audio delay | Approx. MODE1: 1.5 msec (total: 3.4msec) /MODE2: 1.0 msec (total: 1.5msec)/MODE3: 2.1 msec (total 4.0msec) |
Audio section | |
Maximum input level | MIC -22 dBu (with 0 dB attenuator) |
LINE +24 dBu | |
Audio attenuator adjustment range (pad) | 0 to 48 dB (3-dB steps, MIC input mode only) |
Input connector | XLR-3-11C (female) (x1) |
Input impedance | 4.7 k/ohms or more |
General | |
Operating voltage | DC 3.0 V, (two LR6 AA-size alkaline batteries) |
Battery life | Approx. 5 hours (at 25 C (77 F), 10-mW output using Sony LR6 (AA)-size alkaline batteries with |
CODEC MODE set to MODE1, the wireless remote control function off, DIMMER MODE set to AUTO | |
OFF, and +48 V set to OFF) | |
Dimensions (W x H x D) | Approx. 44 x 78 x 44 mm (1 3/4 x 3 1/8 x 3/4 inches) excluding projection |
Mass | Approx. 245 g (9 oz) including batteries |
Supplied Accessories | Soft case (1) |
Spare battery case (1) | |
USB adapter cable (1) | |
CD-ROM (1) | |
Before Using this Unit (3) |