PAG 9303 PAGlink PL96E V-Mount Battery

PAGlink PL96E Battery

PAGlink PL96E Battery Model 9303

• 96 Watt-hours, 14.8V 6.5Ah
• Rechargeable V-Mount Li-Ion battery
• Batteries in any state of charge can be linked to combine capacities (2 = 192Wh, 3 = 288Wh)
• Current draw capability of 12A when linked (8A individually)
• Hard-wearing, high-current contacts
• Smaller and lighter with a higher energy density than other V-Mount Li-Ion batteries of equivalent capacity
• Auto-compatible with multiple camera data systems and in viewfinder capacity displays (Sony, Red, etc)
• 5-light Run-Time & capacity indicator
• Batteries can be charged whilst linked
• Charges on PAGlink, PAG V-Mount or Sony V-Mount Li-Ion chargers
• Reveals status and usage data stored in microprocessor, for easier battery management
• Battery software can be updated externally
• Independently UN tested and flight-friendly
• 3 year guarantee with no restrictive conditions
• 133 x 84 x 50 mm / 0.73kg

PAGlink is an Industry First

PAGlink batteries can be used individually or linked to power a variety of cameras and equipment used for broadcast acquisition, video production or digital cinematography.

Link-Up and Power-Up

PAGlink was designed so that flight-friendly battery units that have capacities below 100Wh can be linked to create a high-capacity Li-ION power source on locations. Linking two 96Wh PL96 batteries doubles the capacity to 192Wh; three batteries provide 288Wh. No other system offers as much power.

Flight Friendly

The PL96 is unrestricted, in quantity, when you fly. Li-Ion batteries that have capacities greater than 160Wh are banned from passenger aircraft.

The PL96 has been tested to UN standards by an independent authority and certified to comply with air transport safety regulations.

Each PAG Li-Ion battery is labelled with its UN Test number and air travel quantity allowance, based on its capacity.

The PAGlink Network

Linked batteries form a network that enabled them to communicate with each other, managing the output safely, and preventing the transfer of charge between batteries.

Run-Time & Capacity Display

The PL96e incorporates a 5-light Run-time & capacity indicator which shows remaining camera run-time in hours and minutes.  When linked, run-time is displayed for the total of all batteries connected. Battery state-of-charge is displayed as a percentage, in 6 increments.

In-Viewfinder Information

PAGlink batteries support four different camera data systems that display capacity in the viewfinder/LCD: Sony, IDX, Red and Anton Bauer. The battery recognises the systems data protocol and adapts automatically when connected. The battery can be configured easily by the user for compatibility with any Red camera that uses the reverse SMB protocol.

Linked Battery Charging

Linked battery charging was developed by PAG and is unique to the PAGlink system. It is more efficient because it allows more batteries to be charged on fewer and smaller chargers, with less user-intervention.

Ultra-Tough Construction

The battery case is manufactured from high-impact, injection-moulded polycarbonate which is inherently very strong. The internal case design also protects the cell-pack against damaging impact.

​